The short answer
Beats headphones connect over Bluetooth, so pairing is done from the phone, tablet or computer you want to listen from — not from the headphones themselves. The headphones just have to be awake, charged and in pairing mode, which usually means holding a button until an indicator light flashes.
On an iPhone or iPad, turn on Bluetooth, switch the headphones on and hold them close to the device. They show up in Settings > Bluetooth (some models with an Apple chip pop up a card on screen automatically). On an Android phone or tablet, turn on Bluetooth, put the headphones into pairing mode, then tap their name in the list of available devices. The free Beats app does the same job and adds firmware updates.
Once a device has been paired, you don't repeat the process. Switch the headphones on within range and they reconnect on their own.
What you need before you start
A few basics save a lot of fiddling:
- Charge in the headphones. Pairing mode needs power, and a nearly flat battery can drop out mid-pairing. Fifteen minutes on the charger is often enough to get going.
- Know your model's button. Over-ear and neckband Beats generally use the power button. Earbud models often put the pairing button on the charging case or on the earbud itself. If you're unsure, the quick start leaflet in the box or the model's support page shows the exact one.
- Bluetooth switched on, and the right screen open. On iOS that's Settings > Bluetooth; on Android it's Settings > Bluetooth (sometimes under Connected devices); on a computer it's the Bluetooth panel in system settings.
- Nothing else competing for them. If the headphones are still connected to a tablet in the next room, your phone may not see them at all.
- The Beats app, if you're on Android. It isn't compulsory, but it gives you a pairing shortcut, battery levels and firmware updates in one place.
Pair Beats headphones with an iPhone or iPad
-
01 /
Turn on Bluetooth and stay on the settings screen
Open Settings > Bluetooth and switch Bluetooth on. Keep this screen open — this is where the headphones will appear.
-
02 /
Switch the headphones on and bring them close
Power them on and hold them within arm's length of the iPhone or iPad. If they were already on and connected to something else, switch them off and on again so they start looking for a device.
-
03 /
Wait for the headphones to appear
Models with an Apple chip show a card near the bottom of the screen with the model name and battery levels — tap Connect. Other models appear under Other Devices; tap the name.
-
04 /
Confirm the prompt
If a pairing request appears, tap Pair. Nothing else is needed; the Bluetooth entry changes from 'Not Connected' to 'Connected'.
-
05 /
Check the sound actually routes to them
Play something with the volume low, then raise it. If audio still comes out of the phone's speaker, open the output control in Control Centre and select the headphones by name.
Pair Beats headphones with an Android phone or tablet
-
01 /
Install the Beats app first (optional but worth it)
Get it from Google Play and open it once. It gives you a pairing button, battery readings and firmware updates, which matter because Beats don't update themselves on Android the way they do on iOS.
-
02 /
Switch on Bluetooth
Go to Settings > Bluetooth (on some phones it's under Connected devices) and turn it on. Stay on the screen that lists available devices.
-
03 /
Put the headphones into pairing mode
Press and hold the power button — or the button on the case or earbud, depending on your model — until the indicator light starts flashing. Flashing means discoverable; a steady light or no light usually means it hasn't worked.
-
04 /
Tap the headphones in the list
They appear under 'Available devices' or 'Other devices' with their model name. Tap it and accept the pairing prompt if one appears.
-
05 /
Open the Beats app to finish up
The app confirms the connection, shows battery per earbud where relevant, and offers any firmware update. Run updates before you judge the sound or the connection.
Pair with a Windows laptop, Mac, Chromebook or console
Computers work the same way as phones, just with different menus:
- Windows 11: Settings > Bluetooth & devices > Add device > Bluetooth, then pick the headphones. On Windows 10 it's Settings > Devices > Bluetooth & other devices > Add Bluetooth or other device.
- Mac: System Settings > Bluetooth, with the headphones in pairing mode and nearby.
- Chromebook: the Bluetooth section of the quick settings panel, then Pair.
Games consoles are the exception. Xbox consoles don't accept standard Bluetooth headphones at all, and a PS5 needs a USB transmitter rather than a direct Bluetooth connection. The Switch does support Bluetooth audio through its Bluetooth Audio menu, though the connection can be fussier than on a phone. Check what your console supports before assuming the headphones are at fault.
Switching between devices you've already paired
Most Beats headphones reconnect to the last device that used them, which is why they sometimes 'disappear' when you open Bluetooth on a second device. To move them deliberately:
- Disconnect from the current device in its Bluetooth menu, or simply switch Bluetooth off on it, then select the headphones on the device you want.
- On Apple devices signed into the same Apple ID, some models switch by themselves when you start playing on another device.
- Pairing a new device doesn't erase the old ones, but the exact number of remembered devices varies by model.
If you've moved to a new phone and the old one keeps stealing the connection, remove the headphones from the old phone's Bluetooth list entirely.
When they won't pair: match the symptom to the fix
| What you're seeing | Likely cause | What to try |
|---|---|---|
| The headphones never show up in the list | Not in pairing mode, or still connected to another device in range | Hold the button until the light flashes, and switch Bluetooth off on any other phone, tablet or laptop nearby |
| The name appears but tapping it does nothing | A stale pairing record on the phone | Choose Forget this device (Android) or Forget This Device (iOS) in Bluetooth settings, then pair again from scratch |
| They connect, then drop out every few minutes | Distance or wireless interference | Keep phone and headphones on the same side of your body, and move away from Wi-Fi routers, USB hubs and crowded desks |
| Paired, but sound still comes from the phone | Audio is being routed elsewhere | Open the volume or output control and select the headphones by name |
| Only one earbud plays | The two earbuds have lost sync with each other | Put both in the case, reset them following your model's instructions, then pair again |
Reset the headphones as a last resort
A reset clears the pairing memory and returns the controls to defaults. It fixes a surprising number of stubborn connection problems, but only try it after a forget-and-repair cycle has failed.
-
01 /
Charge them properly
A reset rarely takes on a low battery. Give them twenty minutes on the charger first.
-
02 /
Forget the headphones on every device
Remove them from the Bluetooth list on your phone, tablet and computer so none of them tries to reconnect halfway through.
-
03 /
Hold the reset combination for your model
On most over-ear Beats this means holding the power button for around ten seconds until the indicator flashes. Earbud models often use the case button. Sequences differ between models, so follow the reset steps for your exact pair rather than a generic video.
-
04 /
Pair again from scratch
Switch them on, put them into pairing mode and repeat the normal pairing steps. If they still won't connect to any device, that's a hardware question for Beats support rather than a settings problem.
Easy mistakes worth avoiding
- Trying to pair while the headphones are connected elsewhere. Switch them off, then on, so they stop holding the old connection.
- Pressing the button for too long. A short hold usually powers them on; a longer one enters pairing; an even longer one can reset. Count the seconds.
- Skipping firmware updates on Android. Out-of-date firmware causes more dropouts than anything else, and Android won't update Beats without the app.
- Judging the fit before pairing is finished. Some models chime on connection and again when you seat them properly — wait for the second confirmation.
- Cranking the volume straight after pairing. Start low and raise it. Newly connected headphones can jump to full volume on some sources.
- Expecting two devices at once. Most Beats connect to one device at a time; treating that as a fault leads to a lot of unnecessary resetting.
Frequently asked questions
Do I need the Beats app to pair the headphones?
No. Pairing works from the Bluetooth settings on any phone, tablet or computer. The Beats app is mainly for Android users and adds firmware updates, battery readings and a pairing shortcut.
How many devices will Beats headphones remember?
It varies by model, but most remember several paired devices while staying connected to only one at a time. Older pairings can be removed from the Bluetooth list on the device itself.
Can I use Beats headphones with a cable instead?
Some models have a wired option — a 3.5 mm jack, or audio through the charging port on certain pairs. Wired listening doesn't need pairing at all, though the controls may behave differently. Check what your model supports.
Why do my Beats keep connecting to my old phone?
They reconnect to the last device they were paired with when it's in range. Forget the headphones on the old phone's Bluetooth list, or switch that phone's Bluetooth off, and the connection will go to the device you're actually using.
Does pairing delete my sound settings or custom controls?
No. Pairing only creates a link between the two devices. Only a factory reset clears stored pairings and returns the controls to their defaults.



