The short answer
Take both earbuds out of the charging case and keep them close together. True wireless Skullcandy buds switch on and go straight into pairing mode when they cannot find a device they already know. Open the Bluetooth menu on your phone or laptop, wait a few seconds for the Skullcandy entry to appear in the list of nearby devices, then tap it.
If your model has a physical button on the bud or the ear cup — most of the over-ear and some older sport designs — hold that button down for roughly four to five seconds instead, until the light starts flashing.
That is the whole job in most cases. Everything below is about the situations where it does not work first time.
What you need before you start
- Charge level
- At least a partial charge in both buds and the case — a flat bud will not enter pairing mode
- Distance
- Keep the buds and the phone within about a metre while pairing, with nothing solid between them
- Phone setting
- Bluetooth switched on and the Bluetooth settings screen open
- Old pairings
- The Skullcandy entry removed from any phone that used the buds previously
- Optional app
- The Skullcandy app, only for models that support it — it is not needed for basic pairing
You do not need the app, an account or a firmware update to pair. Standard Bluetooth is enough. The app adds things like EQ presets, firmware updates and, on some models, multipoint — but if pairing itself is the problem, leave the app out of the equation until the buds are connected.
How to pair Skullcandy earbuds, step by step
-
01 /
Charge the buds first
Drop both earbuds into the case and connect the case to a charger for about half an hour. A bud with a nearly flat battery often lights up but never enters pairing mode, which is why so many failed attempts are really battery problems.
-
02 /
Remove the old pairing from your phone
Open Settings, go to Bluetooth, find the Skullcandy entry in the list of previously connected devices and choose Forget this device (Android) or Ignore this device (iPhone). Old pairing keys are the second most common reason a new connection refuses to form.
-
03 /
Put the buds into pairing mode
For true wireless models, take both buds out of the case and hold them a few centimetres apart. They switch on, chime or announce that they are pairing, and the light on one or both buds starts flashing. On models with a button, press and hold it for four to five seconds instead.
-
04 /
Wake up the phone's Bluetooth
Switch Bluetooth off and back on, or toggle aeroplane mode briefly. This forces a fresh scan for nearby devices rather than showing the stale list from earlier.
-
05 /
Tap the Skullcandy entry
It usually appears under the model name — Skullcandy Indy, Dime, Push, Sesh, Mod and so on. Tap it, then accept the pairing request. On Android, allow both media audio and phone audio when prompted.
-
06 /
Confirm with sound
Play a track and check that both ears are working. If only one bud plays, or the buds appear as two separate devices in the list, jump to the one-bud fix below.
Two different pairing routines
| Stage | Buds in a charging case | Buds with a power button |
|---|---|---|
| Entering pairing mode | Take both buds out of the case; they power on and search automatically | Press and hold the power or pairing button for about four to five seconds |
| What you watch for | Flashing light on the bud, plus a chime or voice prompt | Flashing light, often alternating between two colours |
| If nothing happens | Check the case contacts are clean and the buds are charged | Hold the button longer, but be aware a long hold can trigger a reset |
| Where the manual lives | Quick-start card in the box, or the Skullcandy support pages for your model | Same — the button timings differ between models |
Pairing to a second device, a laptop or a TV
The buds can remember several devices but normally connect to only one at a time. To move them to a laptop:
- Forget the buds on the phone first, or switch the phone's Bluetooth off entirely.
- Put the buds back into pairing mode.
- Add a Bluetooth device on the laptop and select the Skullcandy entry.
- On Windows, check the buds are set as the default playback device in the sound settings if audio still comes out of the speakers.
Some Skullcandy models support multipoint, which lets two devices stay connected and hands audio back and forth. Where it is supported, it is switched on in the Skullcandy app rather than in your phone's settings.
For a TV without built-in Bluetooth, you need a separate Bluetooth transmitter plugged into the TV's audio output. The buds pair to the transmitter exactly as they would to a phone.
Why your Skullcandy earbuds won't pair
Work through these in order — most failed pairings fall into one of the first three:
- One bud is flat. The pair cannot enter pairing mode as a pair if one side has no charge. Charge both for half an hour.
- The buds are still connected to something else. Check other phones, tablets and laptops nearby and switch their Bluetooth off.
- The phone is holding a stale pairing. Forget the device in Bluetooth settings, then start again.
- Dirty charging contacts. Skin oils and pocket fluff stop the buds charging, and a bud that is not charging will not pair. Wipe the metal contacts on the buds and inside the case with a dry cotton bud.
- Interference. USB 3.0 hubs, external drives, microwave ovens and crowded Wi-Fi can all disrupt a pairing attempt. Move a couple of metres away from them.
- A phone that has hit its device limit. Some Android phones and older laptops cap the number of paired devices. Remove a device you no longer use and try again.
- A second bud that paired on its own. If the list shows two Skullcandy entries, forget both, then pair again with both buds out of the case.
Fixing a pair that only plays in one ear
True wireless buds talk to each other before they talk to your phone. When that link breaks, one bud connects and the other sits silent — or both appear as separate devices in the Bluetooth list. The fix is to force them to re-form the pair.
-
01 /
Forget both entries
In your phone's Bluetooth settings, remove every Skullcandy entry — there may be two if the buds split.
-
02 /
Power everything down
Put both buds in the case, close the lid and wait about ten seconds so both are properly off.
-
03 /
Bring them out together
Open the lid and take both buds out at the same moment, keeping them close to each other. The second bud should chime or flash shortly after the first.
-
04 /
Wait for the single entry
Give it 15–20 seconds before scanning for devices. Only one Skullcandy entry should appear; if two do, repeat the process.
-
05 /
Pair and test both ears
Connect, then play something with clear stereo separation to confirm the second bud has joined.
Resetting the buds before pairing again
If the buds refuse to pair or stay split, a reset clears the saved device list and returns them to how they left the factory. The method varies between models: some reset by holding the touch panel or button on both buds for around ten seconds, others by holding the case button, and some have a reset option in the Skullcandy app. Check the support page for your exact model before you try, so you press the right thing for the right length of time.
After a reset, nothing is remembered. You will need to forget the buds on the phone and pair from scratch.
Keeping the connection reliable
Once paired, the buds should reconnect on their own within a few seconds of coming out of the case. If they do not, the usual causes are a flat case battery, the phone's Bluetooth being off, or the buds connecting to a different device first.
Two habits make a real difference. Charge the case rather than only the buds, because the case is what keeps them topped up between sessions. And keep the phone in a pocket or bag on the same side of your body as the master bud — Bluetooth drops out far more often through a torso than through air, particularly outdoors where the signal competes with everything else in the 2.4 GHz band.
If sound stutters only when you are walking through a busy high street or a station concourse, that is interference, not a faulty pair, and it usually clears once you are away from the crowd.
Frequently asked questions
Do I need the Skullcandy app to pair my earbuds?
No. Pairing uses standard Bluetooth and works from your phone, tablet or laptop settings alone. The app is only useful for models that support EQ presets, firmware updates or multipoint.
How far away can I use Skullcandy earbuds from my phone?
Expect roughly ten metres in open space with no walls in the way. Indoors, a wall or a floor between phone and buds shortens that considerably.
Will the earbuds pair with more than one device at once?
Not by default. Most models stay connected to one device at a time and you switch by disconnecting the first. Multipoint, where two stay connected, is available only on selected models and is switched on in the app.
Why do my earbuds reconnect to my old phone instead of my new one?
The old phone is closer, or its Bluetooth is on and it remembers the buds. Forget the Skullcandy entry on the old device, or switch its Bluetooth off while you connect the new one.
Can I pair Skullcandy earbuds to a games console?
Not directly, because consoles generally do not accept Bluetooth audio headsets. You would need a Bluetooth transmitter plugged into the console's audio output, and even then voice chat may not pass through.



